Welcome: AiYue powder Coatings
Language: Chinese ∷  English

Architecture Coatings

  • Surpass1050
  • Surpass1050
Surpass1050Surpass1050

Surpass1050

Product description :

Surpass 1050 is  a type of imitation fluorocarbon  powder coating having metallic flash silver effect  that specially  designed  for  architectural aluminium application. Surpass 1050 conform to the requirement of GB 5237.4-2008, Qualicoat(Class1)and AAMA2603-02. Surpass 1050 give a good performance at outdoors weather resistance and colour stability. Thus, is widely used in the places with high demand on outdoors weather resistance, such as windows, aluminium plate, door, curtain wall. Surpass 1050 is a fluorocarbon powder coating, and is available in a variety of colors in the category of high gloss, flat, low gloss.

Powder properties :

Chemical type:

polyester

Particle size :

suitable for electrostatic spraying

Specific gravity:

1.2-1.7 g/cm3, depending on colour

Storage condition:

dry cool conditions below 30°C

Shelf life:

12 months

Stoving schedule:

200°C for 10 minutes to 15 minutes (object temperature)

Coating features:

The physical and chemical testing below is on the substrate of chromated aluminium plate. The coating thickness of all testing substrate is controlled at 60-80um, and curing at the temperature of 200°C for 10 minutes to 15 minutes. The physical performance may deteriorate slightly caused by the decreased of glossiness

Physical testing:

Adhesion:

GB5237.4-2008 4.5.5

pass, class 1

Hardness:

GB5237.4-2008 4.5.4

80

Impact resistance:

GB5237.4-2008 4.5.6

pass, 2.5 mm±0.3mm deformation

no film peel off from the substrate

Chemical testing and weathering testing

Salt  spray(fog) test

GB5237.4-2008 4.5.15

Pass(1000hours) , cut edges less than 2mm

Moisture resistance:

GB5237.4-2008 4.5.16

pass (1000 hours), no blistering

Artificial weather resistance:

GB5237.4-2008 4.5.17.1

Performance excellent, slightly loss of gloss, no cracking, no chalking, no flaking    (1000 hours)

chalking:

none in excess of minimum in ASTM D659:1980

colour difference :

colour deviation less than 5.0

glossiness change

gloss retention more than 50%

outdoor weather resistance

exposure for1 year in  south florida ( facing south,45° angle)

pass , for 12months, data  listed above in the Artificial weather resistance


Pre-treatment: For maximum  protection,  it is essential to pre-treat substrates prior to the application of Surpass 1050. It is necessary for aluminium substrate to receive chromizing treatment.

Coating techniques: Surpass 1050 are applied by manual or auto-spraying equipment. The unused powder collected in the powder recovery system will be recycled.

Caution and warning: The product  is only permitted to be used by the professional coating staff. Coating procedure should be stopped without the health and safety data provided by the Aiyue. In any cases,you should request a copy of this document from Aiyue prior to finish coating if without the health and safety data provided by the Aiyue. The warning of use of powder is listed below. All dust is irritant to the respiratory, and one must avoid inhaling   dust and gas released in baking process. Avoid contacting skin. In case of skin contact, wash thoroughly with soap and water. Rinse immediately with water in case of eye contact and call a doctor. Dust fog formed by the free organic particles may burn in the event of the electric spark or an open flame. Dust and powder cannot be accumulated   in the wall or on the shelf. Dust collection system must be equipped with anti-explosion device. All the equipment must be grounded to avoid accumulation of static electricity. User must abide by the national safety law and regulation.

Disclaimer: The information in this data sheet is not intended to be exhaustive and is based on the present state of our knowledge and on current laws: any person using the product for any purpose other than that specifically recommended in the technical data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk.Meanwhile, all advice we give or any statement made about the product by us is correct to the best of our knowledge but we have no control over the quality or the condition of the substrate or the many factors affecting the use and application of the product. Therefore, unless we specifically agree in writing otherwise, we do not accept any liability whatsoever for the performance of the product or for any loss or damage arising out of the use of the product. The information contained in the file is subject to modification from time to time in the light of experience and our policy of continuous development.


CATEGORIES