Welcome: AiYue powder Coatings
Language: Chinese ∷  English

Architecture Coatings

  • Surpass2000
Surpass2000

Surpass2000

Product description:

Surpass 2000 is an advanced powder coating with good weather resistance, especially designed for aluminium architectural application. We take the weather resistance of Surpass 2000 to an entirely new level, which conform to the requirement of AAMA2604-05. Surpass 2000 have good gloss retention, good color stability, as well as excellent film integrity, which ensure the long-term function of decoration and protection. Surpass 2000 is available in a variety of colors in the category of high gloss, flat, low gloss.

Powder properties :

Chemical type:

polyester

Particle size :

suitable for electrostatic spraying

Specific gravity:

1.2-1.7 g/cm3, depending on colour

Storage condition:

dry cool conditions below 30°C

Shelf life:

18 months

Stoving schedule:

200°C for 10 minutes to 15 minutes (object temperature)

Coating features:

The physical and chemical testing below is on the substrate of chromated aluminium plate. The coating thickness of all testing substrate is controlled at 60-80um, and curing at the temperature of 200°C for 10 minutes to 15 minutes. The physical performance may deteriorate slightly caused by the decreased of glossiness

Physical testing:

Adhesion:

AAMA2604-05 7.4

pass, class 1

Impact resistance:

AAMA2604-05 7.5

pass, 3mm±0.3mm deformation

no film peel off from the substrate

Hardness:

ASTM D 3363

F minimum

Abrasion resistance::

AAMA2604-05 7.6

pass,

Chemical testing and weathering testing

Salt spray(fog) test

AAMA 2604-05 Section 7.8.2

pass(3000hours), cut edges less than 2mm

Moisture resistance:

AAMA 2604-05 Section 7.8.1

pass (3000 hours), no blistering

Resistance to sulphur dioxide:

ISO3231

pass, no blistering, no loss of gloss,no discoloration

Chemical resistance:

good resistance to acid, alkalis and oil at normal atmospheric temperature

Outdoor weather resistance:

AAMA2604-05

exposure for 5 year in  south florida ( facing south,45° angle)

gloss retention more than 30%  , chalking not greater than No. 8, colour difference DE<5

Qualicoat(Class2)

in excess of Qualicoat(Class2) after exposure for 3 year in  south florida

Color stability

good


Pre-treatment: For maximum  protection,  it is essential to pre-treat substrates prior to the application of Surpass 2000. It is necessary for aluminium substrate to receive a full multi-stage chromate treatment.

Coating techniques: Surpass 2000 are applied by  manual or auto-spraying equipment. The unused powder collected in the powder recovery system will be recycled.

Remarks The guarantee period of 15 year is only appropriate to qualified user. Please consult Aiyue for information if one would like to learn about  the  powder property and the performance of coating in detail.

Caution and warning: The product  is only permitted to be used by the professional coating staff. Coating procedure should be stopped without the health and safety data provided by the Aiyue. In any cases,you should request a copy of this document from Aiyue prior to finish coating if without the health and safety data provided by the Aiyue. The warning of use of powder is listed below. All dust is irritant to the respiratory, and one must avoid inhaling   dust and gas released in baking process. Avoid contacting skin. In case of skin contact, wash thoroughly with soap and water. Rinse immediately with water in case of eye contact and call a doctor. Dust fog formed by the free organic particles may burn in the event of the electric spark or an open flame. Dust and powder cannot be accumulated in the wall or on the shelf. Dust collection system must be equipped with anti-explosion device. All the equipment must be grounded to avoid accumulation of static electricity. User must abide by the national safety law and regulation.

Disclaimer: The information in this data sheet is not intended to be exhaustive and is based on the present state of our knowledge and on current laws: any person using the product for any purpose other than that specifically recommended in the technical data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk.Meanwhile, all advice we give or any statement made about the product by us is correct to the best of our knowledge but we have no control over the quality or the condition of the substrate or the many factors affecting the use and application of the product. Therefore, unless we specifically agree in writing otherwise, we do not accept any liability whatsoever for the performance of the product or for any loss or damage arising out of the use of the product. The information contained in the file is subject to modification from time to time in the light of experience and our policy of continuous development.

CATEGORIES